ENGLISH
8 BEFORE YOU OPERATE THE MONITOR
CAUTION
Put the monitor on a stable surface. The monitor may cause injury or damage if it
falls or is dropped.
Do not give a strong impact to the monitor. It may cause damage.
Unplug the monitor before removal or installation to avoid an electric shock or a
damage.
<Removal>
Put a piece of soft cloth on the table beforehand to prevent the monitor from being scratched.
Lay the monitor flat on a table with front face down.
Press the Hook on the back of the monitor and remove the Stand-Neck from the monitor.
Loosen the ’thumb screw’ to remove the Stand-Base from the Stand-Neck.
<Installation>
Combine the Stand-Neck and the Stand-Base.
Tighten the ’thumb screw’ to secure the Stand-Base.
Put a piece of soft cloth on the table beforehand to
prevent the monitor from being scratched. Lay the
monitor flat on a table with front face down.
Hold the monitor and install the Stand-Neck to the
monitor until it clicks to secure.
FITTING AND REMOVAL OF BASE : G-MASTER G2470HSU /
G-MASTER
G2770HSU
Stand-Neck
Stand-Base
Thumb screw for Stand-Base
<Bottom view>
Hook
