Iiyama DPS110, Руководство пользователя

Страница: 23 / 28

20
DLP Personal Projector
Caution
To reduce the risk of severe burns, allow the projector to cool for at least 45
minutes before replacing the lamp.
To reduce the risk of injuries to fingers and damage to internal components,
use caution when removing lamp glass that has shattered into sharp pieces.
To reduce the risk of injuries to fingers and/or decreasing image quality by
touching the lens, do not touch the empty lamp compartment when the lamp
is removed.
This lamp contains mercury. Consult your local hazardous waste regulations
to dispose of this lamp in a proper manner.
Resetting Lamp Hours
If you replace the lamp after 1500 hours of operation, please proceed as follows
within 10 minutes of powering on.
OSD FUNCTION
Press the Exit button on the projector for 3
seconds to display the total used lamp time.
• Press the MENU button on the
projector during the lamp hour
message. An adjustment message will
appear.
• Press
W
or
X
to reset lamp hours or
press EXIT to leave.