Setting up with a Power Line Adapter
1. Pick up one of your Power Line Adapter (PLA) units and
plug one end of an ethernet cable into the LAN port.
2. Plug the other end of the ethernet cable into an
available LAN port on your modem.
3. Plug the PLA unit into an electrical outlet.
Using a double adaptor or a power board is not
recommended.
4. Pick up your other PLA unit and plug one end of an
ethernet cable into the LAN port.
5. Plug the other end into the ethernet port on the
back of the device you wish to connect to your
modem (e.g. iiNet TV set top box).
6. If you haven’t already done so, make sure the
electrical outlets used for both PLA units are
turned on. The PWR (power) lights on each unit will
illuminate.
7. All done! When both PLA units have a connection
with each other, the LAN lights will turn on and
remain solid.
LAN port
modem LAN
ethernet port
