Iijima PACK MASTER RO-105S, Руководство по эксплуатации

Страница: 15 / 40

9
O
2
Measurement (Auto mode) The measurement starts automatically when is pressed. Refer to
the section “Switching the measurement mode” (page 4 ) for details
on switching between the auto mode and manual mode.
1.
When the Measurement Standby screen is displayed, press .
The measurement starts, and the Stability Decision screen opens.
The decision is completed when a beep sounds and the stabilized measured value
appears.
• If the “Sensor error”, “Sensor unstable”, or “Negative pressure detected” message appears, refer to the section “Error
Messages” (page 27) and confirm and remedy the situation.
• To stop the measurement while deciding the stability, press
. The measurement will be aborted.
2.
To record the measured value, press on the Measurement
Complete screen.
The measured value is saved in the main unit.
Refer to section "Memory function" (page 10 ) for details.
The value indicated when is not lit is read.
O
2
measurement (Manual mode)
1.
If the Manual mode is not enabled, press .
This step is not required if the Manual mode is enabled.
The selected measurement mode is saved even when the power is turned OFF.
<Auto mode> <Manual mode>
2.
With the Measurement Standby screen displayed, hold down (Suction).
The pump operates only while is held down.
In the manual mode, the stability decision is canceled while the pump is operating.
The stability decision starts when the key is released, and the pump stops.
(If the measurement value fluctuates, the Stability Decision screen will appear.)
The decision is completed when a beep sounds and the stabilized measured value appears.
The value indicated when is not lit is read.
3.
To record the measured value, press on the Measurement Complete screen.
The measured value is saved in the main unit.
Refer to section "Memory function" (page 10 ) for details.
The pump operates only while is held down. Refer to the
section “Switching the measurement mode” (page 4 ) for
details on switching between the auto mode and manual mode.