3
Charging USB plug device from Pocket Powerbank:
Power on the powerbank by sliding the power switch to expose the USB port. The
powerbank’s charging LED will always be on.
Use
your device’s original USB charging cable to connect to the powerbank’s USB output.
Your USB plug device should also indicate that it is being charged.
When your USB plug device is fully charged, disconnect the powerbank.
When the
powerbank’s 3 LEDs are all off, the powerbank is out of power and need to be
recharged.
Power Status LED (sliding the switch):
3 LEDs on: 70% ̴ 100%
2
LEDs on: 35% ̴ 70%
1 LED on: below 35%
LED indication while being charged:
3 LEDs on: 100% fully charged
2 LEDs on: 50% ̴ 99%
1LED on: below 50%
Remark: Please kindly note the
powerbank’s input an output function is separate. When you
charge the powerbank, it will not charge USB plug devices.
To save energy, whenever you disconnect the USB plug device from the Travel Powerbank,
please remember to power off the unit using the sliding switch to cover the USB port. Then the
powerbank’s charging LED will be off.
Important notes:
Please fully charge the powerbank before you use it for the first time.
Please do not charge the powerbank while it is being charged to microUSB mobile
devices.
When charging the powerbank, use only the original cable, otherwise it might be
damaged.
Do not drop, knock, dissassemble or attempt to repair the powerbank by yourself.
Do not immerse the powerbank in water or make it wet.
Do not expose the powerbank to a heat source like fire or heater.
Keep out of reach of children.
Do not use in the presence of flammable gas.