26
SDMX PS/2 Mini Extender Range
Transferring DDC Information
To support non-standard screen settings or other features, it is possible to read
and store DDC information into the Local Unit directly from the monitors
connected to the Remote Unit. You only need to carry out this procedure once;
the Extender Units store the DDC information in non-volatile memory and
restore it at power-up.
1.
Ensure that you have installed and powered up the system according to the
instructions in Section 3.
2.
Connect the monitor to the ‘monitor 1’ socket on the Remote Unit (see
Figure 2).
3.
Enter Command mode (see page 21).
4.
Select the video channel to which you want to apply the DDC settings by
pressing either <1>, <2> or <0> (both channels).
5.
Press the key combination:
<Left Control> + <D>
6.
The DDC information is read from the monitor and applied to the selected
video channel(s) in the Local unit. This may take a few seconds. The
Remote console keyboard LEDs flash twice to indicate a successful transfer.
Always reboot Windows after adjusting a DDC parameter.
Содержание SDMX/D2
Страница 2: ......
