Ihse kvm-tec media4Kconnect KT-6935, Быстрая установка

Страница: 1 / 4

Check out our Installation
Channel:
Delivery Content
LOCAL/CPU Unit
1 x Media4Kconnect redun-
dant local (CPU)
2 x 12VDC 2A power supply
1 x DP-DP cable 1,8m/5.9ft
1 x USB A-B cable 1,8m/5.9ft
2 x SFP+Multimode up to
300m/984ft
alt. 2 x SFP Single Mode up
to 10km/6.2mi
4 x rubber feet
REMOTE/CON Uni t
1 x Media4Kconnect redun-
dant remote (CON)
2 x 12VDC 2A power supply
2 x SFP+Multimode up to
300m/984 ft
alt. 2 x SFP Single Mode up
to 10km/6.2mi
4 x rubber feet
KT - 6935 SET media4Kconnect Special redundant
KT - 6935L CPU/Local media4Kconnect Special redundant
KT - 6935R CON/Remote media4Kconnect Special
redundant
First
Aid
kvm-tec
Video error
(stripes in the
picture)
USB is not
working
No Power
(No LED)
Check the
powerplug
Is the power
supply ok? Try
another Unit.
Try reprogramming
the Unit by using a
JTAG programmer
Contact kvm-tec
support
Are the USB
Devices plugged
in correctly?
Is the USB cable
on the Local side
plugged into the
PC?
Are the USB
Devices working
directly on the
PC?
Check if local
and remote Unit
have the same
fi rmware
Replace the USB
cable from PC to
the Local
Extender
Check if the local
or the remote
Unit is causing
the problem by
swaping fi rst the
local and than the
remote Unit to
another Unit
Contact kvm-tec
support
Check if all
cables are plug-
ged in correctly
Check if the PC is
sending a Image by
plugging in a
monitor on the
local out of the
local Unit
Check if the DDC is
set correctly (in menu
under point „O“)
Check if both
Units have the
correct fi rmware
Contact kvm-tec
support
Check if all
cables are plug-
ged in correctly
Check if the PC is
sending a Image
by plugging in a
monitor on the
local out of the
local Unit
Check if local and re-
mote Unit have the
correct fi rmware
Check if the DDC
is set correctly (in
the menu under
point „o“)
Check if the
network switch
is setup correctly
and has enough
bandwidth
Contact kvm-tec
support
Check if other units
have the same
behaviour
kvm-tec Support kvm-tec Support support@kvm-tec.comsupport@kvm-tec.com
Phone: +43 2253 81912 - 30Phone: +43 2253 81912 - 30
We are here for you to answer
your questions about installation?
Manual download www.kvm-tec.com
or
kvm-tec Installationchannel on our homepage
personally +43 2253 81912
No video
4K DP 1.2 redundant
media
4K
connect Special
with RS232 & sound
media
4K
connect
Quick
Installation
kvm-tec