First
Aid
kvm-tec
SMARTFLEX
smart connection
Misprints, errors and technical changes reserved
Misprints, errors and technical changes reserved
6.
6.
Check the firmware version
....
how to update the firmware
how to update the firmware
To perform a firmware update
To perform a firmware update
Make sure that the main menu is open.
Make sure that the main menu is open.
Press U to update the USB flash drive.
Press U to update the USB flash drive.
Update Service with kvm-tec Switching Manager Demoversion ....
This is a comfortable update management for your switching system.
You can update all extenders at the same time. The update is performed in the background and in a second step the
units are rebooting with the new firmware.
Only a short time is needed for the second step.
ATTENTION
! Only when the bar is grey, the update is finished.
To view the firmware version
Make sure the
main menu
is open. The currently installed firmware version of the remote and local units are
displayed (e.g. ‘4267’) and check that you have the same firmware on both units.
Ways to update the firmware version
....
There are four ways to perform an update:
UBS stick update
