Operation
2011-02-23
27
6 Operation
Pos: 26 /806-IHSE/Betrieb/Übertragungsparameter neu bestimmen (Auto-Adjust)/473-xx @ 5\mod_1278578041089_6.doc @ 42060 @ 2
6.1
Readjustment of Transmission Parameters
(Auto-Adjust)
On KVM Extenders with USB-HID support (not for model K473-SST), the
user can initiate an automatic readjustment of transmission parameters.
The KVM Extender will automatically optimize video quality.
1. Enter Command Mode (default: 2x <Left Shift>; see Chapter 5.4,
Page 26).
2. Press the <a> key to start Auto-Adjust.
The screen will blank for a short time.
The KVM Extender will exit Command Mode.
Transmission parameters have been readjusted. Video quality should
be optimal.
Pos: 27 /806-IHSE/Betrieb/Laden von DDC-Informationen/473-xx @ 5\mod_1278578094526_6.doc @ 42078 @ 233
6.2
Download of DDC Information
By default, the factory preset DDC information is sent to the source
(computer, CPU). In some cases the factory preset DDC information may
not be appropriate, so the option exits to read the actual DDC information
from the attached monitor. The DIP switches have to be set correctly (see
Chapter 5.2, Page 24).
There are two ways to read DDC information from the attached monitor:
Via keyboard command during operation (see Chapter 6.2.1,
Page 28).
Reconnecting the monitor cable at the CON Unit (see Chapter 6.2.2,
Page 28).
