Singlemode Modules:
Two fibers 9μm. E.g. I-V(ZN)H 2E9 (Inhouse patchcable) or I-V(ZN)HH
2E9 (Inhouse Breakout cable) or I/AD(ZN)H 4E9 (inhouse OR outdoor Breakout cable, stress
resistant) or A/DQ(ZN)B2Y 4G9 (outdoor cable, stress resistant with protection against animal
biting) All notations acc. VDE specification.
Transceiver-Modules (Fiber Transmission)
The used transceivers are Class 1 laser products. They comply with IEC 60825-1 and FDA 21
CFR 1040.10 and 1040.11. To meet laser saftey requirements the transceivers shall be operated
within the absolute maximum ratings.
Caution
The use of optical instruments with this product will increase eye hazards! All
adjustments have been made at the factory prior to shipment of the device. No
maintenance or alteration to the device is required.
Tampering with or modifying the performance of the device will result in voided product
warranty.
Usage restrictions
The optical ports of the modules must be terminated with a optical connector or with a dust plug.
Note
Failure to adhere to the above restrictions could result in a modification that is considered an act
of “manufactoring,” and will require, under law, recertification of the modified product with the
U.S. Food and Drug Administration (ref. 21 CFR 1040.10 (i)).
Required labels
FDA
IEC
Complies with 21 CFR 1040.10 and 1040.11
Class 1 Laser Product
Laser emission
revision: January, 2004
DAVX - dig. A/V-Extender
24
Transceiver-Modules (Fiber Transmission)
indication of laser
aperture and beam