SNMP Module
Operation
93
6.9.3 Resetting the SNMP Module to the Factory Settings
NOTICE
If you perform a (factory) reset, all current settings and the configuration stored in the SNMP module will
be lost. This also applies to the network parameters (reset to default IP-address and DHCP) and the
admin password.
NOTICE
If a firmware update has been carried out since the delivery, this firmware version is retained.
To perform a reset of the SNMP module, proceed as follows:
1. Select
Device > Advanced Service > Factory Reset > Factory Reset
in the menu bar.
An access window appears.
2. Enter the username and password of the administrator.
3. Click the
Ok
button to confirm your entries.
Fig. 80
Management software dialog
Authentication required
A query to reset the SNMP module appears.
4. Click the
Yes
button to reset the device.
Fig. 81
Management software dialog
Factory Reset SNMP Board
The SNMP module is reset to factory settings and DHCP is activated (474-SNMPV3) or deactivated
(474-SNMP).
Fig. 82
Management software message
Factory Reset
(example 474-SNMPV3)
