SETTING THE TIME
1.
Press and hold the
Time Set Button
located on the back of the unit
for 2 seconds until the clock display flashes and a beep sounds.
2.
Press
the
–
or
+
Buttons
to adjust the clock to the current time (hold
for rapid setting). Make sure you set the correct AM/PM time. The PM
indicator appears to the left of the display; there is no AM indicator.
3.
To toggle the clock display between standard 12 hour time and 24 hour
(“military”) time display, press the
Alarm
or
Alarm Button
while
the display is flashing during time setting.
4.
Press and release the
Time Set Button
to confirm the current time
setting. The YEAR will flash on the display. Press the
–
or
+
Buttons
to set the correct year.
5.
Press and release the
Time Set Button
to confirm the current year
setting. The month will flash on the display. Press the
–
or
+
Buttons
to set the correct month.
6.
Press and release the
Time Set Button
to confirm the current
month setting. The day will flash on the display. Press the
–
or
+
Buttons
to set the correct day.
7.
Press and release the
Time Set Button
to confirm settings. 2 beeps
will sound to indicate time setting mode is complete.
DAYLIGHT SAVINGS (DST) SWITCH
This unit has a
DST
switch
on the bottom of the unit to adjust the time
for daylight saving time and standard time. By default, it is set to Auto
and will automatically adjust the time at the start and end of daylight
saving time. If you wish to adjust manually, slide the switch to +1 to add
one hour or to –1 to subtract an hour.
SETTING AND USING ALARMS
This unit features dual alarms which can be set to different times and alarm
sources. Each is set in the same way. Instructions are given as “Alarm
Button”; use
Alarm 1 Button
or
Alarm 2 Button
to set respective alarms.
0QVG
: Each step must be completed while display is flashing or setting will
time-out with any changes saved.
1.
Press and hold
the
Alarm Button
for 2 seconds until the alarm time display
and alarm icon flash. A beep sounds.
2. Press the
–
or
+ Buttons
to adjust the alarm time to the desired time (hold
for rapid setting). Make sure you set the correct AM/PM alarm time. The PM
