11
SETTING AND USING THE SLEEP
TIMERS (Continued)
Press the
Sleep Button
during sleep to set sleep to review sleep time
remaining. Press again to go to next (lower) sleep duration. During sleep
mode, any current light therapy sound levels and/or light therapy brightness
levels will gradually be lowered to off.
After setting the sleep timer, your settings will be saved for later use. At any
time simply press the Sleep button to enter directly into that sleep preset.
* Note:
the unit will silence the audio but will NOT turn off your Aux device.
B L U E T O O T H
PAIRING
Pairing establishes a unique communication connection between the unit
and your Bluetooth device. Once paired, you will be able to stream audio
wirelessly to the iZBT10 and control features using the iHome Zenergy™ app.
1. Turn on your Bluetooth device and make it
“discoverable” by turning on Bluetooth mode
(check in Options or Settings).
2. Press and release the
Power Button
to turn
on the iZBT10 in Bluetooth (PHONE) mode.
The
first time the unit is turned on it will enter auto
pairing mode
: voice prompts will announce
“pairing” and PAIR and the BT icon will flash on
the display while the unit attempts to pair.
“
iHome iZBT10
” should appear on your device’s
menu. Select “iHome iZBT10” on device to
begin/complete pairing. If your device asks for a
password, enter 1234 on the keyboard of your
device. A voice prompt will announce “Bluetooth
connected”. If no device is paired within 3
minutes, the unit will revert to its previous state.
iHome iZBT10
NOTE:
Pairing to “iHome iZBT10” connects the unit to your Bluetooth device to
play music. The “iHome iZBT10 app” name is related to the Zenergy app.
Download and pair to this to extend and enhance iZBT10 operating options.
(
Continued on page 12
)
