Setting the Clock Time Using Time Sync
The Time Sync feature allows you to sync the time setting on the unit to the time on your iPhone or recent model iPod (iPod touch,
iPod nano and iPod Classic; older iPod models such as iPod mini do not support this feature).
1. Press and release the
Time Sync/Set Button
located at the back of the unit. “Sync” flashes on the display and a
beep
sounds.
2. Once sync is completed, “DONE” appears on the display followed by 2 beeps indicating time sync is complete. The
updated time will appear on the display.
3. If sync was not successful, “FAIL” will appear on the display and a long beep will sound. If this happens, please try again,
with a different iPhone or iPod if needed. If sync still fails, please see Setting Clock Manually below to set the clock.
NOTE: iPhone time is automatically updated to the correct time via cell phone towers. The time on your iPod is accurate
only to the time on the computer the last time the iPod was synced to it. It’s possible to have up to 59 seconds difference
between the unit and synced iPhone/iPod.
Setting Time Zone, Daylight Saving Time, Clock and Calendar Manually
If you want to set the clock manually instead of using the Time Sync feature please proceed as follows:
1. If Daylight Saving Time is now in effect set the
DST switch
on the back cabinet to the “+1” position. If Standard Time is
now in effect set the DST switch on the back cabinet to the “ – 1” position.
2. The default clock setting is Eastern Time. If you live in the Eastern Time zone no further adjustments are necessary. If you
live in a different time zone press and hold the
Time Zone Button
on the back cabinet until the unit beeps and “EAS”
appears in the clock display, then press and releasze the
or
buttons
until your own time zone appears in the display.
Press and release the
Time Zone Button
to exit the Time Zone setting mode. The unit beeps twice and the display shows
the time in your time zone.
3. Press and hold the
Time Sync/Set Button
on the back cabinet until the time display begins flashing, then press and release
the or
buttons
to adjust the time display. Hold the or
buttons
for rapid adjustment, then release the buttons
and press repeatedly to set the display to the exact minute. Observe the PM indicator to make sure you have set the time
correctly. If the PM does not appear the time displayed is AM. (Note: if you wish to change the time display from the 12-hour
format to the 24-hour format, sometimes called ‘military time’, press and release either the or
button
to switch
between 12-hour and 24-hour display formats.)
4. Press and release the
Time Sync/Set Button
again. The Year flashes in the display. Press and release the
or
buttons
to set the correct year if necessary.
5. Press and release the
Time Sync/Set Button
again. The Month and Date flashes in the display (ex. 3:13 = March 13). Press
and release the
or
buttons
to set the correct month and date if necessary.
6. Press and release the
Time Sync/Set Button
once more to exit the setting mode. The unit beeps twice to confirm that the
time and calendar settings are complete.
Using the Alarms
Setting the Alarms
This unit offers dual alarms and lets you wake to iPhone/iPod, FM radio or buzzer. If iPod is the selected wake to source and no
iPhone/iPod is docked or detected, the unit will automatically default to buzzer alarm.
Note:
The alarm sounds for 1 hour. Make sure you have an hour of audio on your iPhone/iPod.
1. Press and hold the
Button
until the display flashes. The unit will beep. Press and release the
or
Button
to set the
alarm time (hold to set rapidly). Remember to set the correct AM or PM time.
2. Press and release the
Mode/Wake-to Button
as needed to cycle to the desired wake-to source: iPod, radio or buzzer.
3. Press and release the
Button
(or no button press within 10 seconds). Two beeps will confirm alarm one is set and exit
alarm setting mode. The alarm is then armed, indicated by the alarm icon on the display.
4. To set Alarm 2 just follow steps 1 - 3 using the
Button
.
Operating the Unit
4
