background image

Sound is distorted

Volume level is set too high

Decrease the volume

Sound source is distorted

If  the iPad/iPhone/iPod original sound source (MP3) is old or of poor 

quality, distortion and noise are easily noticed with high-power speakers. 

Try a different file from a trusted source such as iTunes.

If you are using an external sound source like older generation of iPod 

or iPod Shuffle, try reducing the output volume on the device itself. Also 

try turning bass boost OFF.

10

Troubleshooting

Solution

Symptom

Possible Problem

Unit/adaptor gets 

warm after extended 

play at high volume

This is normal

Turn unit off for awhile or lower volume

Lower EQ settings.

EQ settings are too high.

Custom snooze time not set

Alarm not working

AM/PM time/alarm time not set correctly

When setting clock or alarm time, take note of the AM/PM indicators

Alarm time or source selected for alarm 2 , not 

alarm 1 or vice versa 

Wake schedule setting is not correct

7 days is every day alarm, weekday is Mon-Fri, and weekend is Sat-Sun.  

See page 4 for setting alarms.

Calendar is not set correctly, which can affect

wake schedule alarm operation

See page 3 for setting Clock/Calendar Section.

Make sure to set the alarm time and source for the alarm icon 1 or 2 

that is shown on the clock display 

Snooze time
is too long/short

Press and hold Snooze button then press + or - Button to adjust

P12

Содержание iHome iD45














Отзывы: