Using the iH31
Powering the Lamp
a) Attach the AC adapter cable to jack on the back of the iHL31, and then power the lamp by plugging the power plug into a
b) The iHL31 uses a halogen bulb (G9) 6.35 with a maximum wattage of 35W (included).
c) The light can be turned on by either pressing the Light button at the base of the lamp or using the remote control by pressing the
Installing your iPod
a)
The iHL31 comes with removable dock inserts to ensure your iPod fits perfectly in the docking station.
b) Place proper insert for your iPod (see insert table under Quick Start) in dock, then gently dock iPod. When docked, your
iPod will charge until fully charged.
Unit will not overcharge iPod. Note: The iHL31 will not control or charge 3G iPod
models.
c) Upon removal, gently pull upwards to minimize rocking back and forth.
Using the Line-in and Line-out Jacks
a) An audio patch cord comes with the iHL31. Use it to play non-docking iPods or other audio devices through the iHL31
line-in jack (one end in the device’s line-out or headphones jack, the other in the iHL31 line-in jack). Make sure there is no
iPod docked in the iHL31 when using the line-in jack.
Any non-docking iPod models, including the iPod Shuffle as well as
other audio devices using the patch cord, will not charge.
b) Use the line-out jack to connect the iHL31 to the line-in jack of other audio devices such as a tape recorder or amplifier
.
The volume slider of the iHL31 does not control line-out volume (adjust on the attached device instead). The line-out jack is
not recommended for headphones.
Listening to your iPod
a) The base of the lamp features four buttons to control your music: volume control, speaker on/off, and bass boost. Use Vol-
to decrease sound, Vol+ to increase, Speaker to turn the speaker power on and off, and Bass for added bass.
b) The same controls may be accessed with the remote control. Please refer to the remote control diagram for usage.
Table of Contents
Using the iHL31.................................................................................................................................................................................2
Quick Start.........................................................................................................................................................................................3
Consumer Guide to Product Safety...................................................................................................................................................6
Troubleshooting.................................................................................................................................................................................7
2
wall socket.
On/off light button.
Using the Remote Control Unit..........................................................................................................................................................4
Maintenance......................................................................................................................................................................................5
FCC Regulations...............................................................................................................................................................................5
