Playing Audio via Aux
6
P10
1. Move the
Lock/Aux/Bluetooth Switch
to the Aux position (center) to listen to audio via aux
in.
2. Connect the micro USB plug to the micro USB charging port on the back of the unit and
connect the 3.5 mm audio plug to the headphone or line-out jack on your audio device.
3. Power on the audio device and place in play mode.
4. Press and hold the
Power Button
to turn on the unit (release when green light appears).
5. Use the
/
- Buttons
to adjust volume. You may wish to adjust the volume on your
audio device, too.
6. When done listening, press the
Power Button
to turn the unit off. Remember to turn off your
audio device, too.
Using the
iDM8N
