Snooze/Display Dimmer (ZZZ Button)
1. To program Snooze, press and hold the
Snooze/Display Dimmer
during normal operation (when
no alarm is sounding).
2. Press the
–
or
+
Buttons
to select the desired snooze time (between 01 and 29 minutes).
3. Press
the
Snooze/Display Dimmer Button
to confirm Snooze setting. 2 beeps will sound.
4. While the alarm is sounding, press and release the
Snooze/Display Dimmer Button
to
temporarily silence the alarm for the set duration (9 minutes is the default). Snooze can be used
several times during the 1 hour alarm sounding time.
5. To adjust the brightness of the display, press and release the
Snooze/Display Dimmer Button
during normal operation (when no alarm is sounding) to cycle through the brightness display
settings (Hi, 3, 2, Lo, and Off).
5
Previewing the Alarm and Turning the Alarm On/Off
1. Press and release the
Alarm Button
to view the current alarm time.
2. Press and release the
Alarm Button
as needed to toggle the alarm ON and OFF, indicated by the
related white alarm indicator and a beep
.
3. When the alarm sounds, press the
Power Button
or corresponding
Alarm Button (1 or 2)
to
disable the alarm and reset it to come on at the same time the next day.
Wake to Bluetooth
: You will wake to the currently linked Bluetooth device. If no device
is detected, the alarm will default to current Tone.
Wake to Tone
:
Press the
Alarm Button
to confirm. Press the
–
or
+
Buttons
as
needed to listen to and to select one of the four built-in wake-to
tones (t1 - t4).
5. Press
the
Alarm Button
to confirm the alarm source. The volume display will flash.
6. Press the
–
or
+
Buttons
to adjust the alarm volume. Note that the alarm volume setting is stored
separately from other volume settings.
7. Press
the
Alarm Button
to confirm the alarm settings and exit alarm setting mode. 2 beeps will
confirm alarm setting is complete. The alarm icon on the display will indicate the alarm is armed.
