background image

Charging the iBT69

Using Bluetooth with the iBT63

Charging the iBT63

Bluetooth Mode

Aux-in Mode

mobile phone

PSP

iPod

Laptop

PC

MP3/MP4

• Slide the 

Off/Play/Pair Switch

 on the speaker to the PAIR position. 

Tones will sound and the  light will flash blue and red to indicate pairing 
attempt.  

•  Place your audio device in Bluetooth mode (often found in the device’s 

Settings or Options menu) and make it “discoverable”. “iHome iBT69” 
should appear on your device. If “Not Connected” or similar message 
appears, select “iHome iBT69” to connect. If prompted for a password, 
enter “

1234

” on your device’s keypad.

• Once paired, the light will glow solid blue and a confirmation beep will 

sound and you can then stream audio. If pairing is not successful, turn 
the power OFF on the speaker and repeat pairing procedure.

•  To listen to Bluetooth audio in the future, slide the 

Off/Play/Pair Switch

 

on the speaker to the PLAY position. The light will flash blue as the 
speaker attempts to auto-link with the last previously linked unit in range 
(30 feet). 

• Control Bluetooth audio from your device.
  Remember to turn off the speaker and your device after listening.

  NOTE: When unit is charging, the blue light will appear solid red.

Using Bluetooth with the iBT69

The iBT69 is powered by a rechargeable battery in the speaker. 

Make 

sure to charge the speaker before using.

 

• Connect the micro-USB plug to the               USB Audio/Charging jack 

on the speaker.

• Connect the larger USB plug to a powered USB port, such as that on a 

computer. The light on the speaker will turn to solid red while charging 
and turn off when fully charged. When the light dims or if you start to 
notice sound distortion at higher volumes, it's time to recharge the 
batteries.

Charging the iBT69

• Connect the micro-USB plug to the               USB Audio/Charging jack 

on the speaker.

• Connect the stereo 3.5mm audio plug to the headphone jack or line-out 

of any audio device.

• Slide the 

Off/Play/Pair Switch

 on the speaker to the PLAY (middle) 

position. The blue power light will flash as the speaker attempts to 
auto-link. 

• Press play on your audio device and adjust its volume to listen to audio.

NOTE

: Do not play a Bluetooth device and an audio device connected via 

the USB audio/charging jack at the same time or you will hear both at 
once.

Using the iBT69 with Aux Devices

Micro USB plug

Standard 

USB plug

3.5mm audio 

plug

Combination cable

Note: Charge speaker before use.

Computer USB port

Note: When not in use, turn speaker OFF to save battery power

(

)

IB (English) - Revised  
Size: 324Wmm x 184Hmm
Color: Print  in Black color
Date: Mar. 21, 14.

Speaker

Bottom of Speaker

Off/Play/Pair Switch

LED

USB Audio/Charging Jack

Отзывы: