iBT44
Using the
5
P9
Using Bluetooth: Pairing Your Device
1. Turn on your Bluetooth-enabled device and turn on Bluetooth capability as described in the device’s
user manual.
2. Press the
Power Button
to turn the unit ON (pairing is available in any mode).
3. Press and hold the
Button
on the unit for 2 seconds to begin
pairing the unit with your device. “PAIR” will flash on the display, and the button will flash blue,
indicating pairing attempt.
“iHome iBT44” should appear on your device’s menu. If “Not Paired”, “Not Connected” or similar
message appears, select “iHome iBT44” on the device to connect it. If your device asks for a
password, enter
1234
or
0000
on the keyboard of your device. If no device is paired within 2
minutes, a tone will sound and the unit will revert to its previous mode. To retry pairing, press the
Power Button
to turn the unit OFF then press again to turn back on, then follow steps 2 & 3 again.
4. Once paired with a device, the
PAIR
indicator on the display will stop flashing then “
DONE
” will
appear briefly. The
Bluetooth Button
will flash twice then glow solid blue. On some devices, you must
then select “Use as Audio Device” or similar on the device’s Bluetooth menu. Once paired, your device
should link to the iBT44 whenever within range (about 30 feet).
