6
Setting the Clock
1. Press and hold the
Time Set Button
located on the back of the unit for 2 seconds
until the clock display flashes and a beep sounds.
2. Press the
–
or
+
Buttons
to adjust the clock to the current time (hold for rapid
setting). Make sure you set the correct AM/PM time. The AM and PM indicators
appear to the left of the display.
3. To toggle the clock display between standard 12 hour time and 24 hour (“military”) time display,
press the
Alarm
or
Alarm Button
while the display is flashing during time setting.
4. Press the
Time Set Button
to confirm the time and exit clock setting mode. 2 beeps will confirm
clock setting is complete.
Setting and Using the Alarm
This unit features dual alarms which can be set to different times and alarm sources. Each is set in the
same way. Instructions are given as “Alarm Button”; use
Alarm Button
or
Alarm Button
to set
respective alarms.
Note
: Each step must be completed while display is flashing or step will time-out with any changes
saved.
1. Press and hold the
Alarm Button
for 2 seconds until the time display and alarm icon flash. A beep
sounds.
2. Press the
–
or
+
Buttons
to adjust the alarm time to the desired time (hold for rapid setting).
Make sure you set the correct AM/PM alarm time. The AM and PM indicators appear to the left of
the display.
3. Press the
Alarm Button
to confirm the alarm time setting. The
wake-to
source will flash.
Using the
iBT38
