5
P8
iBT3
Using the
(iBT5 with included
Bike mount)
Installing the Bike Mount (no tools required)
1
2
3
4
1. Remove
bolt
from
mounting clamp
by turning
plastic nut
left/counter clockwise. Set bolt and plastic nut aside.
2. Place
mounting clamp
around handlebar or stroller handle. Test the
fit by re-inserting
bolt
and replacing
plastic nut
(turn right/clockwise).
Do not overtighten.
IF handle is too large (plastic nut does not engage the bolt), remove
the rubber spacers inside the mounting clamp and try again.
3. Loosen pivot nut by turning left (counterclockwise). Adjust pivot to
desired angle, then tighten pivot nut.
4. Guide threaded
pivot bolt
on top of bike mount into threaded
socket on the bottom of iBT3 and turn device right/clockwise to
tighten.
