8
P9
Setting and Using the Alarms
(Continued)
1.
Press and hold
the
Alarm Button
for 2 seconds until the alarm time display, alarm button
and alarm icon flash. A beep sounds.
2. Press the or
Buttons
to adjust the alarm time to the desired time (hold for rapid
setting). Make sure you set the correct AM/PM alarm time. The PM indicator appears to the
left of the display; there is no AM indicator.
3. Press the
Alarm Button
to confirm the alarm time setting. The alarm schedule will flash.
4. Press the or
Buttons
to cycle to the desired schedule: “7 d” (every day), “5 d” (week
days) or “2 d” (weekends).
5. Press the
Alarm Button
to confirm the alarm schedule setting. The wake-to source will flash.
6. Press the or
Buttons
to select the desired wake to alarm source: Bluetooth, FM radio
or selected tone.
Wake to Bluetooth:
You will wake to the currently linked Bluetooth device. If no device is
detected at wake time, the alarm will default to tone one (”t1”).
Wake to Radio:
Press the
Alarm Button
to confirm. Press the
Presets Butto
n to select an FM
preset to wake to, or press the or
Buttons
to tune in a desired wake to station. (To set
Presets, see
Setting and Using FM Presets
on page 10.)
Wake to Tones:
You will wake to the selected tone. Press the
Alarm Button
to confirm, then
press the or
Buttons
to preview and select a desired tone (t1 -t4).
7. Press the
Alarm Button
to confirm the wake to source. The alarm volume will flash.
8. Press the or
Buttons
to select the desired alarm volume.
9. Press the
Alarm Button
to complete alarm setting and exit alarm setting mode. 2 beeps will
confirm alarm setting is complete. The alarm icon will remain on the display, indicating the
alarm is armed.
8. To turn off a sounding alarm and reset it to come on the next day at the same time, press
the
Power Button
or the associated alarm button ( or ) to reset alarm.
Previewing the Alarm and Turning the Alarm On/Off
Press and release the desired Alarm Button as needed to toggle the alarm ON (indicated by the
alarm icon and lit alarm button) or OFF (no alarm icon/alarm button is not lit).
Using the
iBT233
