iBT16
Using the
4
Using Bluetooth: Pairing Your Device
P8
1. Turn on your Bluetooth-enabled device and turn on Bluetooth capability as described in the device’s
user manual.
2. Move the
Power OFF/Bluetooth/Aux Switch
on the unit to the Bluetooth position (center). The unit
will turn on and attempt to auto link to a previously paired device for 10 seconds, indicated by a 3
note tone and the
Power/Charging/Pairing Indicator Light
on the back of the unit flashing blue. If
a linked device is found, the indicator will glow solid blue.
3. If no linked device is found, the unit will enter pairing mode, indicated by a 2 note tone and the
Power/Charging/Pairing Indicator Light
on the back of the uni
t
will flash blue and red while the unit
attempts to pair.
NOTE
: If the unit is charging while pairing is attempted, the light will continue to glow
red (it will not blink blue and red). “iBT16” should appear on your device’s menu. If “Not Connected”
or similar appears on your display, tap on the “iBT16” to begin pairing. If your device asks for a
password, enter
1234
on the keyboard of your device. If no device is paired within 2 minutes, a
tone will sound and the unit will revert to auto link mode. To retry pairing, move the
Power
OFF/Bluetooth/Aux Switch
to the OFF position (left) then move it back to the Bluetooth position
(center).
4. Once paired with a device, the
Power/Charging/Pairing Indicator Light
on the back of the unit will
glow blue steadily. There should be an indication on your device that pairing is complete. On some
devices, you must then select “Use as Audio Device” or similar on the device’s Bluetooth menu. Once
paired, your device should link to the iBT16 whenever within range.
