iBN4
Using the
4
P8
Using Bluetooth:
Pairing and Playing Your Device
Using NFC
This unit features wireless NFC pairing, which allows playing NFC–enabled devices to pair and play
instantly. For pairing non-NFC devices, please see the following section “Using Bluetooth: Pairing Your
Device Manually”.
1. Turn on your Bluetooth–enabled/NFC–enabled device and turn on NFC capability
(typically under ‘Settings’) as described in the device’s user manual.
2. Place your NFC–enabled device in play mode.
3. Turn the dial on the speaker unit to mode.
4. Touch the area of your playing NFC device against the
antenna on top of the unit. The unit will enter automatic pairing
mode, tones will sound and “PAIR” will flash on the display while
the unit attempts to pair.
If prompted, accept Bluetooth pairing.
“iHome iBN4” should appear on your device’s menu under
Bluetooth Settings. Once paired with a device, the PAIR indicator
will stop flashing, the Bluetooth icon will remain and your music will
play through the unit.
5. Use the controls on your device to play or pause audio and navigate tracks.
6. Turn the
Volume Dial
to adjust the volume on the unit. You can also adjust volume on your device.
7. When done listening, turn the Power dial to turn the unit OFF. Remember to turn off your audio device,
too.
NOTE
: To disconnect your device, simply touch it again on the antenna on top of the unit. To pair a
device manually, please see the following “Using Bluetooth: Pairing Your Device Manually” section.
