6
S E T T I N G A N D U S I N G T H E A L A R M S
SETTING THE ALARMS
This unit has two alarms which are set the same way. Instructions below are
for setting alarm 1. Substitute the Alarm 2 Button to set alarm 2. You can
wake to your Bluetooth device or to the built-in tones. The alarm will sound
for 60 minutes or until reset/turned off.
1. Press and hold the
Alarm Button
until the alarm time display flashes and
one beep sounds.
2. Press the
+
or
–
Buttons
to adjust the display to the desired alarm time (hold
for rapid adjustment). Remember to set the correct AM or PM alarm time.
3. Press the
Alarm Button
to confirm the alarm time. The wake to schedule
will flash.
4. Press the
+
or
–
Buttons
to set the desired alarm schedule: 7 Days (every
day), 5 Days (week days only) or 2 Days (weekends only).
5. Press the
Alarm Button
to confirm the alarm schedule. The wake source
indicator will flash on the display. Press the
+
or
–
Buttons
to select BT
(Bluetooth) or Tone, then press the
Alarm Button
to access preferences
and volume setting for the selected alarm source.
Wake to BT:
If wake to Bluetooth (BT) is selected, press the
+
or
–
Buttons
to set the BT volume (can be set from 5–40). The alarm will
wake you to the last track played on the last linked Bluetooth
device.
Note
: if Bluetooth is not detected at alarm time,
alarm will default to tone.
Wake to Tone:
Select to wake to one of the 4 built-in alarm tones. Press
the
+
or
–
Buttons
to listen to and select the desired tone.
Confirm with the
Alarm Button
, then press the
+
or
–
Buttons
to set the alarm volume (can be set from 5–40).
6. Press the
Alarm Button
to exit and confirm alarm settings. An alarm
icon will appear on the display, indicating that the alarm is set and armed.
NOTE: alarm volume is independent from normal volume.
