iBN19
Using the
Setting and Using the Alarm
6
P10
Note
: each step must be completed while display is flashing or step will time-out with any changes saved.
1. Press and hold the
Alarm Button
for 2 seconds until the time display and alarm icon flash.
2. Press the
–
or
+
Buttons
to adjust the alarm time to the desired time (hold for rapid setting).
Make sure you set the correct AM/PM alarm time. The AM and PM indicators appear to the left of the
display.
3. Press the
Alarm Button
to confirm the alarm time setting. The
wake-to
source will flash.
4. Press the
–
or
+
Buttons
to select the desired wake to alarm source: Bluetooth or tone.
Wake to Bluetooth
: You will wake to the currently linked Bluetooth device. If no device is
detected, the alarm will default to current Tone.
Wake to Tone
: Press the
Alarm Button
to confirm. Press the
–
or
+
Buttons
to select one of the four
built-in wake-to tones.
5. Press the
Alarm Button
to confirm the alarm source. The volume display will flash.
6. Press the
or
Buttons
to adjust the alarm volume on the unit from 05 - 30. Note that the alarm
volume setting is stored separately from other volume settings.
7. Press the
Alarm Button
to confirm the alarm settings and exit alarm setting mode. 2 beeps will confirm
clock setting is complete. The alarm icon will remain on the display, indicating the alarm is armed.
Previewing the Alarm and Turning the Alarm On/Off
1. Press and release the
Alarm Button
to view the current alarm time.
2. Press and release the
Alarm Button
as needed to toggle the alarm ON and OFF, indicated by the alarm
icon.
