5
s
WIRELESS HEADPHONES - B • INCOGNITO
Power Button
LED Indicator Light
This button is for turning the
headphones on/off and pairing
Indicates if the headphones are
on/off, pairing, or charging.
D
F
G
G
D
E
2
Your Wireless Headphones
2.2 Control Panel Features
Micro USB Charging Port
Line-In Input Jack
Volume (+) / Next Track
Multi-Function Button
Volume (–) / Previous Track
This is the area to plug-in and
charge your headphones
This is the area to plug-in your
auxiliary cable
Skip to the next track.
Increase the volume.
This button will do the following,
Pause & play music, Answer &
hand up calls, Reject calls, Redial.
Skip to the previous track.
Decrease the volume.
A
B
C
F
E
B
A
C
3
Quick Start Guide
3.1 Charging & Powering ON
Connect the Micro USB cable (only use the provided cable) to
a computer USB port or a USB wall charger. Plug the other
end of the micro USB cable into the Micro USB charging port
(E) located on the bottom of the right earcup. While charging
the LED indicator light (G) will turn RED and then turn OFF
when the battery is fully charged. (
this can take approx 2-3hrs
)
Ensure the headphones are turned off, then press and hold
the Power button (B) for about 5 seconds to turn the
headphones ON. The headphones will enter Bluetooth
pairing mode automatically and emit a tone as the LED
indicator light (G) will flash BLUE and RED.
NOTE: please refer to the diagram on 2.2
1
2
1
1
2
