IHI Shibaura SR525HP-S, Руководство оператора

Страница: 115 / 154

33
①
Starting the engine
(1) Move the cock to the [Open] position.
(2) Take the driver’s seat.
(3) Step the brake fully or apply the parking
brake.
(4) Make sure that the forward/reverse pedal is
at the neutral position (not stepping).
(5) Push down the accelerator lever frontward.
(6) By turning the key switch to the [HEAT]
position, the glow lamp among the monitor
lamps lights up.
(7) After the glow lamp goes out, turn the key
switch to the [START] position. When the
engine starts, leave the key. Make sure that
the charge lamp and the oil pressure lamp in
the monitor lamps go out. If the lamps do not
go out, stop the operation immediately and
find the cause.
(8) Return the accelerator lever and warm up the
engine for several minutes at the idling
speed.
<Warming up>
This machine operates hydraulically. If warming
up is neglected, the hydraulic system may fail
causing an accident.
In cold districts, as the temperature decreases,
oil viscosity increases so that hydraulic operation
may become slower or normal pressure may not
be obtained.
To prevent such troubles, be sure to warm up the
engine up.
②
Stopping the engine
● By moving the accelerator lever to the [Low
speed] position and turning the main switch
to the [OFF] position, the engine stops.
3. Lifting and lowering the mower
By moving the lifting/lowering lever to the A
direction, the mower lifts and by moving the lever
to B direction, the mower lowers.
By leaving your hand from the lifting/lowering
lever, the lever returns automatically to the
neutral position.
36