Turn
Bluetooth
“On”
TESTING INSTRUCTIONS
USING WITHOUT iOS DEVICE
Your iHealth Wireless Pulse Oximeter uses Bluetooth 4.0 Low Energy (BLE) technology.
Enable the Bluetooth on your iOS device (Settings->General->Bluetooth->On), launch
the app to initiate the connection
.
The Bluetooth icon will light up and stop flashing
when a successful connection is established. The date and time of the Pulse Oximeter
will be synced with your iOS device upon first successful connection.
1. Open the clamp of the Pulse Oximeter, then place your
middle, ring or index finger of your left hand into the
rubber opening of the oximeter with nail side down, as
pictured.
2. On the front panel, press the “Start” button once to turn the oximeter on.
3. Keep your hand still for the reading.
4. After a few seconds, your SpO2 reading will appear on the oximeter display screen
and the app if the app is turned on.
5. If the signal strength is too low, switch to another finger and perform the test again.
After it has been used for the first time, the date and time of the Pulse Oximeter will be
synchronized with your iOS device. It can also be used without being connected to an
iOS device. In this case, the measurement data is stored in memory and can be
uploaded to the app when the connection is re-established. The Pulse Oximeter can
iHealth Cloud account by using your app login name and password. Go to
www.ihealthlabs.com, then click on “Sign In”.
4