Tap the Scale to turn it on.
Launch the app to initiate the connection. The
Bluetooth
icon on
your device will light up and stop flashing when a successful
connection is established. You will also see the
Bluetooth
icon on
your Scale light up. The Scale is now connected and ready for your
weigh-in.
3. Your next weigh-in
Subsequent daily weigh-ins can be taken without being connected
to your mobile device, as your weight data is stored in the Scale
and uploaded to the app upon your next connection. Real-time
weight results are viewable in the app if the Scale is connected to
SCALE HANDLING & USAGE
• The iHealth Wireless Scale Lina can measure weight up to
180 kg/400 lbs.
• For best results, the Scale should be used on a flat, hard surface.
Soft surfaces such as carpets or rugs may affect the accuracy of
your reading.
• if you wanna measure weight on a soft surfaces, please do it after
you install the 4 foot pads.
• The iHealth Wireless Scale Lina has an automatic shutdown
feature to conserve battery power. The following scenarios will
cause the Scale to go into automatic shutdown mode:
º 45 seconds after finishing a successful weigh-in.
º The battery level is too low to capture an accurate weight
reading.
SOFTWARE UPDATES
From time to time, the Scale's firmware will be updated to enhance
performance. When a software update is available, a notification
message will appear in the app. Complete the following steps to
install the update:
Follow the steps in the "First-time Use" section.
You will see a notification message in the app asking for
permission to proceed. Select "Yes".
The update will begin to download. You will see a cursor on the
scale display moving from left to right. The scale will display "0.0"
when the update is completed.
your mobile device and the app is running when your weigh-in
occurs. The Scale can store up to 200 weight measurements.
When the memory is full, any new measurements will overwrite
the oldest ones.
4
