Connect to iOS via Bluetooth
1.Launch the iHealth MyVitals App from your iOS
device.
2.Enable
Bluetooth
on your iOS device: Slide
gently upward the iPhone screen from to
open the Control Center, and click on the
3.Press "START/STOP" button for 3 seconds until
Bluetooth
indicator begins flashing -- when a
successful connection has been established, the
Bluetooth
indicator light will stop flashing.
4.Use the app to sync the result, the sync indicator
will flash during synchronization and stop
flashing when synchronization has been
achieved.
5.Results will now be viewable from your iOS
device or from any computer by logging in at
www.ihealthlabs.com.
Connect to Android via Bluetooth
• Press "START/STOP" button for 2 seconds until
Bluetooth
indicator begins
flashing.
• Enable
Bluetooth
on your Android device: Settings > Wireless & Networks
>
Bluetooth
.
• Check the
Bluetooth
menu for the model name of your monitor
(BP7SXXX) to appear, and then select it to pair. This may take up to 30
seconds and your monitor’s
Bluetooth
indicator will light up when a
connection has been established.
• Launch the iHealth MyVitals app from your Android device to sync.
• The sync indicator will flash during synchronization and stop flashing
when synchronization has been achieved.
• Results will now be viewable from your Android device or from any
computer by logging in at www.ihealthlabs.com.
Note
：
If you can’t sliding appear the Control Center, you can go to the
Settings
＞
Bluetooth
＞
”On”. Then return back to the iHealth MyVitals app,
and do Step3 again.
