Commissioning
8/13
Manual i.Sense CF.D - V 1.1
Installation scheme
5 Configuration mode
1)
Press and hold the button for about 10 seconds until LED magenta lights up
2)
Connecting the phone/PC to the WiFi network "Master-Calm-xxxx" or "Client-
Calm-xxxx".
3)
Wait for a pop-up browser to open with the web page and portal
4)
In the portal there is a menu hidden behind the icon with the three horizontal
lines. Within this menu there are four options. Three of them are directly visible,
one is hidden for the time being.
a.
New Connection:
Lists WiFi networks in range. After entering the correct password, the module connects to the
network. If the connection is disconnected, reload the page or perform the same step again.
Although this does not help, the distance from module to WLAN access point may be too large,
reduce distance
b.
Saved Networks:
Lists the networks that have already been connected and allows you to connect to them faster.
c.
Exit:
Closes the portal and resumes normal operation of the sensor.
d.
Update:
Only visible when the module is connected to a WiFi network that contains an Internet connection.
List of available updates appears,by clicking these and the update button the update is loaded. A
progress bar appears. After a successful update, the device returns to measuring mode.
6 Commissioning
-
Connecting the master module to i.Cee:plus II via USB
-
Power the client module
-
Setting the baud rate etc.
-
Commands:
o
0
Overview list
o
7
one-time measurement
o
15
start permanent measurement
o
Stop 100 permanent measurements
o
Set 200 transmit power
o
Set 300 measurement intervals
o
Set 400 transmission channel
o
500
Overview of settings made
-
Start measurement, Works with i.Cee:plus II via plug and play
-
Adjusting the threshold in Grafana
When using multiple CF. D
Sets
in
the
immediate
vicinity, the radio channels
must be adjusted.
N
O
T
E
!
By default, the set returns
new values once per second.
This can be adjusted up to a
maximum value of once a
day.
N
O
T
E
!
When using long cables, an
adjustment of the power is
necessary.
N
O
T
E
!
If no connection to the
network is possible, reduce
the distance until connection
is possible.
N
O
T
E
!
