igus Corner, Руководство по установке

Страница: 4 / 6

After this, fold the insertion
flap behind the one that you
have just folded ...
... and push the ends
of the insertion flap ...
... through the back of the
corner. You have then
created the second display
surface.
On the front of the
corner on each side, you will
find a section (the top one)
that you can remove from
the cardboard box.
Fold the lower flap
on each side inwards ...
... and then fold the
insertion flap at the bottom
and insert the ends in the
same way as for the top
display surface.
Fold the insertion flap behind
the previous one in exactly
the same way and push the
ends ...
... through the back of
the corner. You have now
created the middle display
surface.
Take part 3 ...
... turn it onto the back and
by 180°.
Now, fold the flap above the
igus log towards
the rear.
Then, fold the flaps at the
side towards the front.
13. 14. 15.
16. 17. 18.
19. 20. 21.
22. 23. 24.