IGS WAHLAP TECH OverTake, Руководство пользователя

Страница: 19 / 110

14 14
Step 5
Right side of the light box
Card board components
Billboard acrylic
Billboard acrylic
decorative sheets
3. Put the long holes on either side of billboard acrylic onto the studs on either side of the light box,
and then use M5 * 12 (chrome-plated) hexagonal-socket flat head screws to fix billboard acrylic
decorative sheets onto billboard acrylic.
2.Remove 4 M4*25 (black-plated) hexagonal-socket flat head screws, unlock the seat, then put
the seat up, use the hexagonal flat head screws M8 * 50 (black-plated), flat gasket
Φ 8* φ 22*2.0
(black-plated) and spring washer M8 (black-plated to connect the host-machine with the seat,
lock the seat and retighten the 4 removed hexagonal flat head screws.
1.First of all, connect the connecting wires between the host machines and seat properly and the
host-machine shall be near to the seat.
3.Use hex screws M6 * 25 (black-plated), flat gaskets φ 6* φ 20*2.0 (black-plated) and spring washers
M6 (black-plated) to tighten the two pieces of junction plates at the outboard of the host machine.