IGS SPC-100, Руководство пользователя, Страница: 8 / 10

Products handling precaution

There is a risk of electric shock to this product, so do not open the product while power is
applied.
 Be sure to install this product on a fixed location such as a rack or panel.

Do not touch the power plug with wet hands. It may cause electric shock or injury.

Supply the power input within the specified rating range.
 Be careful not to let water or beverages enter the product.

Clean regularly with a soft cloth or brush. If the dust inlet and outlet are blocked, it may
cause product failure.
 To prevent inductive noise, separate wiring from high-voltage lines and power lines.

Avoid installation in places subject to strong magnetism, noise, vibration and impact.
 When extending the sensor wire, use a shield wire and do not make it unnecessarily long.

Sensor wire and signal wire should be wired independently away from power, power and
load wires.
 Avoid using near devices that generate strong high-frequency noise (high-frequency welding
machine, high-frequency sewing machine, high-frequency radio, large-capacity SCR
controller).

Some measurement errors may occur depending on the usage environment and usage
method.

Do not disassemble the product arbitrarily. (Warranty does not apply to products that have
been disassembled.)
 We are not responsible for product damage outside of the warranty conditions specified by
the manufacturer.

It is recommended to calibrate once a year because it can be affected by factors such as
temperature, humidity, and shock during the long-term use period.
※ Be sure to observe the contents specified in the handling precautions above as they may
cause product failure.
※ The specifications and dimensions described in this user manual are subject to change
without notice for improvement.