Thank you for buying this IGS Audio product.
Please read the information provided below very carefully before using your IGS unit.
Unpacking
Your RUBBER BANDS 500 has been carefully and meticulously tested and inspected before
dispatch. Please check for any signs of transit damage. If any signs of mishandling are found
please notify the carrier and your dealer immediately.
Your RUBBER BANDS 500 packing should contain an RUBBER BANDS 500 with IGS Audio
tag (packed in ESD bag) and this manual with the Warranty and RoHS/CE/WEEE Declaration
attached.
Compatibility and Power
The RUBBER BANDS 500 module is designed to be installed into an API™ 500 Series
compatible rack and cannot function stand alone, requiring the power source supplied by the
rack system.
The current consumption of the RUBBER BANDS 500 is rated at 55 miliamperes. Please check
with the rack manufacturer that the design can meet this rating.
Mounting
WARNING!
Never plug or unplug any 500 series module with the power supply switched on.
You may destroy your unit permanently!
The dimensions of all IGS Audio 500 series modules are compatible with API standard. When
plugging your new unit to the 500-series rack, no unnecessary force is needed. However,
please be careful and do not rush while pushing the unit into the rack sockets, to avoid
damaging of the connectors and/or the PCBs of either the unit or the rack.
After the unit is placed in the rack, use the screws provided with your 500-series rack unit to
make sure that the unit is safely placed.
When removing the unit from the rack, unscrew the front panel from the rack, and use your
fingers to pull it out gently. Do not use any sharp objects (i.e. knives or screwdrivers) to prize it.
Содержание RUBBER BANDS 500
Страница 6: ......
