Thank you for buying this IGS Audio product.
Please read the information provided below very carefully before using your IGS unit.
Unpacking
Your RUBBER BANDS has been carefully and meticulously tested and inspected before
dispatch. Please check for any signs of transit damage. If any signs of mishandling are found
please notify the carrier and your dealer immediately.
Your RUBBER BANDS packing should contain an RUBBER BANDS with IGS Audio tag, an
RUBBER BANDS POWER SUPPLY unit and this manual with the Warranty and
RoHS/CE/WEEE Declaration attached.
Compatibility and Power
The RUBBER BANDS uses dedicated external POWER SUPPLY unit and can't operate without
it.
Never attempt to replace the external PSU with the third party one or one made by yourself.
There is a fuse socket near the power cable connector on the PSU. Ensure that the correct fuse
is being used before plugging the TUBECORE to the power outlet.
➔
For US area (115V) use 2A Slow Blow (Type T).
➔
For Europe and rest of the world area (230V) use 1A Slow Blow (Type T).
Always check the voltage selector on the PSU
to ensure that it is set to the proper voltage
available in your country.
Connecting the PSU to the RUBBER BANDS is fairly easy, thanks to industrial standard 7-pin
metal connector and long, heavy duty cable.
Always power up the PSU first
and then use power switch at the front of the RUBBER
BANDS. Follow the reverse order when switching off.
