3
Front panel
1.
HiZ input: used for instrument input
2.
Mic/HiZ switch: selects input between rear(XLR) and front(HiZ)
3.
+48V switch: enables phantom power
4.
-20db Pad switch: reduces input gain by 20dB for (Note: for
XLR input only)
5.
Phase switch: reverses the phase (Note: for XLR input only)
6.
Gain selector: manipulates first stage amplification saturation
7.
Output selector: manipulates second stage amplification
saturation
8.
VU meter
9.
Power indicator
10.
Power switch
Rear Panel
From left to right:
1.
Power socket 230V AC 50Hz-60Hz
2.
Fuse 315 mA Slow Blow
3.
Identification plate
4.
Output – right
5.
Input – right
6.
Output – left
7.
Input - left
Getting started
1.
Connect the NE71 output to your sound interface input with a
symmetrical XLR wire
2.
Connect your microphone to the rear XLR input or instrument
into the front HiZ input
!select the input with the HiZ switch
3.
Activate the selected input channel on your local mixer
4.
Set the Gain switch to 40 and the Output knob to 0
5.
For transistor condensed microphones switch on phantom
power (+48V up position)
6.
For loud input signals (like snare drum) switch on -20dB Pad
(up position)
7.
Switch on the NE71
8.
Turn the Output switch until the audio volume is right
9.
If volume is out of range adjust the Gain knob
Содержание NE71
Страница 2: ...2...
