IGS Audio 1176, Руководство пользователя

Страница: 3 / 6

3
Front panel
1. Input knob (-60dB to 0dB): manipulates input saturation
(NOTE: Threshold level is fixed)
2. Output knob (-60 dB to 0dB): manipulates output level
3. Attack knob (20 to 800 us): adjusts response time (fastest
when set to 7)
4. Release knob (50 to 1100 ms): adjusts release time (fastest
when set to 7)
5. Ratio switch (4:1, 8:1, 12:1, 20:1): sets compression ratio
6. Slam switch: imitates “all buttons on” function
7. Ultra fast dB reduction/VU meter
8. Monitor switch (Bypass, GR, VU): Selects meter display option
between Gain Reduction and Volume Unit. Bypass disables
compression path only, leaving the amplifier path active.
9. Power indicator
10. Power switch
Rear Panel
From left to right:
1. Power socket 230V AC 50Hz-60Hz
2. Fuse 315 mA Slow Blow
3. Identification plate
4. Output
5. Input
Getting started
1. Connect the 1176 to your sound interface (one input and one
output) with two symmetrical XLR wires
2. Send your desired audio file to the selected output
3. Activate the selected input channel on your local mixer
4. Set the Input knob to about 18, Output knob to about 18
5. Set attack to about 3
6. Set release to about 6
7. Set Ratio to 4:1
8. Switch Slam off (down position)
9. Set Monitor switch to GR
10. Switch on the 1176
11. Wait for about 1 minute to let the parameters stabilize
12. Play sound from your source
13. Turn the Input knob until the compression is satisfying
14. Turn the Output knob until the audio volume is right
15. If you need harder compression set the Ratio to a higher setting