iGrid T&D iGW Series, Руководство пользователя

Страница: 31 / 47

─
Index
─
User Manual
17. Hot-Standby Redundancy

Configure column Tag using the following identifiers: #rdcy.IamActive , #rdcy.IamPrimary ,
#rdcy.SwitchOverReady , #rdcy.MyState and #rdcy.PeerState (refer to Figure 193).
Figure 193 - Definition of internal signals #rdcy.IamActive , #rdcy.IamPrimary ,
#rdcy.SwitchOverReady , #rdcy.MyState and # rdcy.PeerState in the iRTU/iGW database using
the iConf configuration tool
The states/values for these internal points are as follows:

o
off : iRTU/iGW is not active
o
on: iRTU/iGW is active

o
off : iRTU/iGW is Secondary
o
on : iRTU/iGW is Primary

o
off : switchover is not ready
o
on : switchover is ready

o
0: Unknown state
o
1: Booting
o
2: Hearing
o
10: actAlone ( Activealone )
o
11: actOK ( ActiveOK )
o
12: actSwitchReq ( Activeswitchoverrequired )
o
17: actReboot ( Activereboot )
o
30: Shutdown
o
40: bckAlone ( Standbyalone )
o
41: bckOK ( StandbyOK )
o
42: bckSwitchReq ( Standbyswitchoverrequired )
o
43: bckSwitchReady ( Standbyswitchoverready )
o
44: bckSwitching ( Standbyswitching )
iRTU, iGW & iRTUe Series
156
rdcy.IamActive
rdcy.IamPrimary
rdcy.SwitchOverReady
rdcy.MyState
and
rdcy.PeerState