1.3 Cleaning and Maintenance
Please make sure that safety-
skilled person once a year.
1. Make sure before installing that all screws are tightly connected and not corroded.
2. There must be no deformations on the housings, f
3. No damages must be showed on the power supply cables, material fatigue and
sediments.
If the device is going to be cleaned, please use moist, lint free cloths. Never use alcohol or
solvents!!
The cooling fan must be cleaned monthly!
To clean the interior of the device please use a vacuum cleaner or an air jet.
We recommend cleaning the lenses weekly to keep the light output as long as possible.
2. DMX Mode
You are able to work with the fixtures in
DMX Mode – in this Mode its possible to control via DMX Controller .
Program Mode – in thsi mode you can use the built in pro
Speed Mode – in this mode you can a
Sound Mode – in this mode the
3. Set Up
3.1. DMX ADD.
Defines the DMX start address
3.2. Manual Dimmer
Manuel dimming 0-100%
This setting overwrites every
built in programs.
5 / 11
S T U D I O P A R Z O O M
1.3 Cleaning and Maintenance
-relating and machine-technical installations are inspected by a
Make sure before installing that all screws are tightly connected and not corroded.
There must be no deformations on the housings, fixations and installations spots.
No damages must be showed on the power supply cables, material fatigue and
If the device is going to be cleaned, please use moist, lint free cloths. Never use alcohol or
ned monthly!
To clean the interior of the device please use a vacuum cleaner or an air jet.
We recommend cleaning the lenses weekly to keep the light output as long as possible.
You are able to work with the fixtures in 3 different modes
in this Mode its possible to control via DMX Controller .
in thsi mode you can use the built in programs
in this mode you can adjust the program speed.
in this mode the fixture reacts to sound impulse.
Defines the DMX start address
This setting overwrites every other setting like the max output in manuel or DMX mode and the
T U D I O P A R Z O O M
technical installations are inspected by a
Make sure before installing that all screws are tightly connected and not corroded.
ixations and installations spots.
No damages must be showed on the power supply cables, material fatigue and
If the device is going to be cleaned, please use moist, lint free cloths. Never use alcohol or
To clean the interior of the device please use a vacuum cleaner or an air jet.
We recommend cleaning the lenses weekly to keep the light output as long as possible.
ut in manuel or DMX mode and the
