7 / 15
S T U D I O P A R P L A T I N U M 1 8 x 4 W W + C W
hite
Mount the projector with the mounting bracket to the truss system using an appropriate clamp.
During overhead installation the projector must be always secured by a safety rope which is designed
to hold the twelvefold weight of the device. Only safety ropes with quick-release safety fastener
elements may be used. Hang up the safety rope in the hole of the mounting bracket. Direct the rope
over the truss or an appropriate fastening point. Hang up the end in the fastening element and tighten
the locking nut.
The maximum falling distance may not exceed 20 cm.
A safety rope once exposed to falling load or damaged may not be used furthermore.
Adjust the inclination with the mounting bracket and tighten the locking screws firmly.
DANGER TO LIFE
An expert must check the installation before initial start-up.
1.5.
Power connection
Caution!
Never leave the device run unattended! Every person that is involved with this item has to be qualified.
Connect the item with the mains. Voltage and frequency must be exactly the same as stated on the
device. The power plug must always be inserted without force.
1.6.
Cleaning and maintenance
Please make sure that the safety-related and mechanical installations are inspected by a qualified
person once a year.
1. Ensure all screws attached to the device or parts of the device are very tight and not corroded.
2. Ensure there are no deformations of the housing, attachment and installation space. This also
includes the ceiling, the suspension and the truss.
3. Electrical connection cables may not have any damages, depositions or signs of material
aging e.g. porous connections
Contaminations like dust should be removed regularly from the device. Use a lint free, damp cloth. Do
not use alcohol or solvents under any circumstances!
The cooling fan must be cleaned monthly!
Use a vacuum or an airbrush
for cleaning the device’s interior.
We recommend cleaning the lenses weekly to keep the light output as high as possible.
