Ignition Strip Blinder X, Руководство пользователя, Страница: 5 / 11

5 / 5
S T R I P B L I N D E R X
A CAUTION When rigging the device, make sure there is no highly-inflammable material
(decoration articles, etc.) within a distance of min. 1.5 m.
Mount the projector with the mounting-bracket to your trussing system using an appropriate clamp.
During overhead installation the projector must be always secured by a safety rope which is designed
to hold the twelvefold weight of the device. Only safety ropes with quick-release safety fastener
elements may be used. Hang up the safety rope in the hole of the mounting bracket. Direct the rope
over the truss or an appropriate fastening point. Hang up the end in the fastening element and tie up
the locking nut. A safety rope once exposed to falling load or damaged may not be used furthermore.
Adjust the desired inclination angle via the mounting-bracket and tighten the screw.
1.1.3. Power connection
Before connecting the item to the main plug, connect the wires to a suitable power plug. The voltage
and frequency must exactly be the same as stated on the device and makes sure that the power plug
is always inserted without force.
Wires: Brown (L), Blue (N), Yellow/Green ( )
A NOTE The connection of the earth wire is strictly recommended! Never leave this device
running unattended! Every person that is involved with this item has to be qualified!
If you want to connect the item direct to the common main power grid, the installation of a separator
with at least a 3 mm contact hole for each pole is necessary. The connection is exclusively permitted
for electrical installation which complies with the VDE-regulations DIN VDE 0100. Indoor installation
must be equipped with an earth leakage circuit breaker (RCD) with 30 mA rated current.
1.1.4. Cleaning and Maintenance
Contaminations like dust should be removed regularly from the device. Use a damp, lint free, cloth. Do
not use alcohol or solvents under any circumstances. Please make sure that safety-related and
mechanical facilities are inspected by a skilled person once a year.
•
Ensure all screws attached to the device or parts of the device are very tight and not
corroded.
•
Make sure there are no deformations of the housing, attachment and installation spot.
This also includes the ceiling, the suspension and the truss.
•
Electrical connection cables may not have any damages, depositions or signs of material
fatigue e.g. porous connections.