Ignition LED PAR 56 Floor WCA 36x1W, Руководство пользователя

Страница: 7 / 12

3. Introduction
Thank you for buying the LED PAR 56 Floor WCA 36x1W
For a successful installation and operation, please
4. Connections
4.1. Electrical connections
If you wish to change the power supply settings, see the chapter Appendix. Connect the fixture to the
mains with the enclosed power cable and plug. The earth
Cable (EU)
Cable (US)
Brown Black
Light blue White
Yellow/Green Green
4.2. DMX connections
To make a DMX512 connection go ahead like it is described in the picture. Make sure that you
use shielded cable. 3pole or 5pole XLR cables are suitable.
If you use a controller with a 5 pin DMX output conne
adapter.
4.3. DMX connection with terminator
Where the DMX cable has to run
environment like a disco for installations
corruption of the digital control signal by electrical
connector with a 120
Ω resistor between pins 2
socket of the last device in the series.
7 / 12
PAR 56 Floor WCA 36x1W. It is a powerful device
and operation, please read this manual carefully.
Electrical connections
If you wish to change the power supply settings, see the chapter Appendix. Connect the fixture to the
mains with the enclosed power cable and plug. The earth has to be connected.
Cable (US) Pin International
Live L
Neutral N
Earth
To make a DMX512 connection go ahead like it is described in the picture. Make sure that you
use shielded cable. 3pole or 5pole XLR cables are suitable.
If you use a controller with a 5 pin DMX output connector, you will need to use a 5pin to 3 pin
DMX connection with terminator
cable has to run a long distance or the equipment is operated in an electrically
for installations, we recommend using a DMX terminator.
signal by electrical noise. The DMX terminator is simply an
between pins 2 and 3, which is then plugged into the
in the series. Please look to the bottom drawings.
powerful device.
If you wish to change the power supply settings, see the chapter Appendix. Connect the fixture to the
International
To make a DMX512 connection go ahead like it is described in the picture. Make sure that you
use a 5pin to 3 pin
in an electrically noisy
terminator. This prevents
is simply an XLR
the XLR output