A CAUTION
Crashing down items can cause serious injuries! Do not install the projector, if you
doubt the safety of a possible installation form
A CAUTION
When rigging the device, make sure there is no highly
(decoration articles, etc.) within a distance of min.
Mount the projector with the mounting
During overhead installation the projector must be always secured by a safety rope which is designed
to hold the twelvefold weight of the device
elements may be used. Hang up the safety rope in the hole of the mounting bracket. Direct the rope
over the truss or an appropriate fastening point
the locking nut. A safety rope once exposed to falling load or damaged
Adjust the desired inclination angle via the mounting
1.1.3. Installation of the
To use this device standing you have to use a base plate.
5 / 16
L E D C O L O R I N V A D E R I I
Crashing down items can cause serious injuries! Do not install the projector, if you
the safety of a possible installation form!
When rigging the device, make sure there is no highly-inflammable material
(decoration articles, etc.) within a distance of min. 1.5 m.
Mount the projector with the mounting-bracket to your trussing system using an appropriate clamp
During overhead installation the projector must be always secured by a safety rope which is designed
to hold the twelvefold weight of the device. Only safety ropes with quick-release safety fastener
Hang up the safety rope in the hole of the mounting bracket. Direct the rope
over the truss or an appropriate fastening point. Hang up the end in the fastening element and tie up
A safety rope once exposed to falling load or damaged may not be used furthermore
Adjust the desired inclination angle via the mounting-bracket and tighten the screw.
base plate
To use this device standing you have to use a base plate.
L E D C O L O R I N V A D E R I I R G B W
Crashing down items can cause serious injuries! Do not install the projector, if you
inflammable material
system using an appropriate clamp.
During overhead installation the projector must be always secured by a safety rope which is designed
release safety fastener
Hang up the safety rope in the hole of the mounting bracket. Direct the rope
Hang up the end in the fastening element and tie up
may not be used furthermore.
bracket and tighten the screw.
