The manual contains complete information about the item and how to operate with the device. Please
once again make sure to that you read the operation instruction and safety information befo
the device. Throughout the manual the following conventions are used distinguishing the elements of
text:
S
CAUTION: Identifies important information which should be followed to avoid damage of device
S
NOTE: Provides additional hints or informati
Menu names, command, icon or button that you can see is shown in bold style.
1. SAFETY INSTRUCTION
A NOTICE
All modifications to the device
to carry out by skilled
A CAUTION
Avoid looking directly into the source of light.
touching the item when ON, the housing can reach a high temperature from the
heat developed by the high power LED.
1.1. FOR SAFE INSTALLATION
1.1.1. Use of the item as intended
•
The Strip Blinder X is
illumination. The device is approved only for a connection up to a maximum of
50Hz.
•
The ambient temperature must be between
device to direct rays of the sun or next to a heating appliance. This also applies for
transportation in closed vehicles.
•
The device may only be operated at a level between
•
The symbol
stands for the min distance between the item and objects. The distance
between light source and surface should not be less than
cm space around the item for good ventilation.
•
Regular stoppages increase the li
•
Avoid shakes and every form of violence during the installation or usage.
•
Make sure that the device is not exposed to extreme heat, humidity or dust at the installation
spot. Make sure that cables do not lie around. This would decrease y
safety of third parties.
•
Do not operate the device during thunderstorms. Overvoltage could destroy the device.
Disconnect the device during thunderstorms completely from the grid by pulling the mains
plug.
•
Avoid looking directly into
particular for people where epileptic seizure has been diagnosed by a doctor
3 / 9
B L I N D E R B I G 6
The manual contains complete information about the item and how to operate with the device. Please
once again make sure to that you read the operation instruction and safety information befo
the device. Throughout the manual the following conventions are used distinguishing the elements of
CAUTION: Identifies important information which should be followed to avoid damage of device
NOTE: Provides additional hints or information that requires special attention.
Menu names, command, icon or button that you can see is shown in bold style.
SAFETY INSTRUCTION
All modifications to the device will void the warranty and installation and r
to carry out by skilled personnel only.
Avoid looking directly into the source of light. It may cause epileptic seizures. Avoid
touching the item when ON, the housing can reach a high temperature from the
heat developed by the high power LED.
FOR SAFE INSTALLATION AND EFFICIENT OPERATION
Use of the item as intended
is designed for use on stages, in discotheques and for architectural
The device is approved only for a connection up to a maximum of
ure must be between
32°F /0°C
and
104°F /40°C
device to direct rays of the sun or next to a heating appliance. This also applies for
transportation in closed vehicles.
The device may only be operated at a level between -20 and 2000m NN.
stands for the min distance between the item and objects. The distance
between light source and surface should not be less than 1.5 m. Make sure that there is
space around the item for good ventilation.
Regular stoppages increase the life of your device.
Avoid shakes and every form of violence during the installation or usage.
Make sure that the device is not exposed to extreme heat, humidity or dust at the installation
spot. Make sure that cables do not lie around. This would decrease your own safety and the
Do not operate the device during thunderstorms. Overvoltage could destroy the device.
Disconnect the device during thunderstorms completely from the grid by pulling the mains
Avoid looking directly into the source of light. It may cause epileptic seizures. This applies in
particular for people where epileptic seizure has been diagnosed by a doctor
B L I N D E R B I G 6
The manual contains complete information about the item and how to operate with the device. Please
once again make sure to that you read the operation instruction and safety information before using
the device. Throughout the manual the following conventions are used distinguishing the elements of
CAUTION: Identifies important information which should be followed to avoid damage of device
will void the warranty and installation and repairs are
It may cause epileptic seizures. Avoid
touching the item when ON, the housing can reach a high temperature from the
on stages, in discotheques and for architectural
The device is approved only for a connection up to a maximum of 230 V AC,
104°F /40°C
. Avoid exposing the
device to direct rays of the sun or next to a heating appliance. This also applies for
stands for the min distance between the item and objects. The distance
. Make sure that there is 50
Make sure that the device is not exposed to extreme heat, humidity or dust at the installation
our own safety and the
Do not operate the device during thunderstorms. Overvoltage could destroy the device.
Disconnect the device during thunderstorms completely from the grid by pulling the mains
the source of light. It may cause epileptic seizures. This applies in
particular for people where epileptic seizure has been diagnosed by a doctor.
