Ignition 2bright Pint TW200 IP, Руководство пользователя

Страница: 35 / 80

1.
Press [MENU] and then [UP] or [DOWN] repeatedly until the display shows ‘Settings’ .
Confirm with [ENTER] .
2.
Press [UP] or [DOWN] repeatedly until the display shows ‘DMX Fail’ . Confirm with
[ENTER] .
3.
Use [UP] or [DOWN] to choose between ‘Hold Last’ , ‘Blackout’ and ‘Manual’ , to make the
setting to be used when the DMX controller fails.
The following sub menus are available:
Menu level 3 Function
‘Hold Last’ The last received signal is held.
‘Blackout’ The spotlight is turned off.
‘Manual’ The device calls up the values set in the ‘Stand Alone’ menu.
4.
Press [ENTER] to accept the selection.
Setting the behaviour on DMX
control failure
Operating
2bright Pint TW200 IP
35
LED PAR