Chapter 3
|
Network Settings
LAN Settings
– 33 –
LAN Settings
The LAN Settings page configures the LAN settings for the local network and guest
network, including IP interface setting, DHCP server settings, STP administrative
status, and UPnP administrative status.
Figure 24: Network – LAN Settings
The following items are displayed on this page:
◆
Members
— The interfaces attached to the local area network.
◆
IP Address
— Specifies the IP address for the local network or guest network.
Valid IP addresses consist of four decimal numbers, 0 to 255, separated by
periods. (Default: 192.168.2.1)
◆
Subnet Mask
— Indicates the local subnet mask. (Default: 255.255.255.0)
◆
MTU Size
— Sets the size of the maximum transmission unit (MTU) for packets
sent on this network.
◆
DHCP Server
— Enables/disables DHCP on this network. (Default: Enabled)
■
DHCP Start
— First address in the address pool. (Range: 1-256;
Default: x.x.x.100)
■
DHCP Max
— Maximum number of addresses in the address pool.
(Range: 1-255; Default: 150)
Содержание SunSpot AC1200
Страница 10: ...Tables 10...
Страница 20: ...Chapter 1 Introduction Main Menu 20...
Страница 67: ...SkyFire and SunSpot MG JCF141020 R02...