IgniteNet SunSpot AC1200, Руководство пользователя

Страница: 25 / 67

Chapter 2
| Status Information
Wireless Status
– 25 –
Wireless Status
The Wireless Status section shows information about the radio settings and
associated clients.
Figure 16: Wireless Status
The following items are displayed in this section:
◆
Radio # — Indicates the 5 GHz or 2.4 GHz wireless interface.
■
Radio Status — Shows if the wireless interface is enabled or disabled.
■
Op Mode — Shows if the unit is configured to operate as an access point
(manually configured), an AP in bridge mode, or an AP in router mode.
■ Channel — The radio channel the access point uses to communicate with
wireless clients. The available channels depend on the 802.11 Mode
1
,
Channel Bandwidth 1 , and Country Code settings 2 .
■
IEEE Mode — The 802.11 wireless LAN standards supported by the access
point.
1. See “Radio Settings” on page 37 .
2. See
“Setup Wizard” on page 15
.